This page contains information about how to deploy dojot using Docker compose. Kubernetes and Google Cloud Platform support is on track to be implemented.
Table of Contents
In order to properly run dojot, the minimum hardware requirements are:
- 4GB of RAM
- 10GB of free disk space
- Network access
- The following ports should be opened:
- TCP (incoming connections): 1883 (MQTT), 8883 (Secure MQTT if used), 8000 (web interface access)
- TCP (outgoing connections): 25 (if send e-mail node is used in a flow)
This document provides instructions on how to create a trivial deployment environment on single host for dojot, using docker-compose as the processes orchestration platform.
While very simple, this deployment option is best suited to development and assessment of the platform and should not be used for production environments.
This guide has been checked on an Ubuntu 16.04 LTS environment.
The following sections describe all Docker compose dependencies.
Up to date information and installation procedures for the docker engine can be found at the project’s documentation:
An optional step on the installation and configuration process of docker on any given machine is the setting of who is eligible for creating/spawning docker instances.
Should the post-installation steps (more specifically the “Manage docker as non-root user”) have not been run, all docker and docker-compose commands should be run by the super user (root), or as sudo.
Up to date information and installation procedures for the docker-compose can be found at the project’s documentation:
To setup the environment, merely clone the deployment repository and run the commands below.
The docker-compose enabled deployment scripts and configuration repository can be found at:
or as git clone command::
git clone https://github.com/dojot/docker-compose.git # Let's move into the repo - all commands in this page should be executed # inside it. cd docker-compose
Once the repository is properly cloned, select the version to be used by checking out the appropriate tag (do notice that the tagname has to be replaced):
# Must be run from within the deployment repo git checkout tag_name -b branch_name
git checkout v0.3.1 -b v0.3.1
Or if you’re brave enough:
git checkout master
After the repository is cloned, and a release (or branch) has been selected, there are still a few external modules that must be gathered before using the platform. These modules can be retrieved by executing the following command:
git submodule update --init --recursive
That done, the environment can be brought up by:
# Must be run from the root of the deployment repo. # May need sudo to work: sudo docker-compose up -d docker-compose up -d
To check individual container status, docker’s commands may be used, for instance:
# Shows the list of currently running containers, along with individual info docker ps # Shows the list of all configured containers, along with individual info docker ps -a
All docker, docker-compose commands may need sudo to work.
To allow non-root users to manage docker, please check docker’s documentation:
The web interface is available at
http://localhost:8000. The user is
admin and the password is
admin. You also can interact with platform
using the Components and APIs.
Read the tutorials/using-api-interface and tutorials/using-web-interface for more information about how to interact with the platform.
This section provides instructions on how to create a simple dojot deployment environment on a multi-node environment, using Kubernetes as the orchestration platform.
This deployment option as presented in this document is best suited for testing and platform assessment. With appropriate changes, this option can be also be used in production environments.
This guide has been checked on a Kubernetes cluster with Ceph as the underlying storage infrastructure and it has also been tested on a Kubernetes cluster over the Google Cloud Platform
The following sections describe all Kubernetes dependencies.
For this guide it is advised that you already have a working cluster.
If you desire to prepare a Kubernetes cluster from scratch, up to date information and installation procedures can be found at Kubernetes setup documentation.
To make sure that all the data from the containers running databases is persisted when containers fail or are moved to different nodes of the Kubernetes environment it is necessary to attach persistent storage to the database pods.
Kubernetes requires that an infrastructure for persistent storage already exists on the cluster. As an example for how to configure your persistent storage we provide files for two different kind of deployments, the first is for a local deployment where a Ceph Cluster is used as storage backend, more information on Ceph may be found at: http://ceph.com/. The second example is based on a Google Cloud deployment and use the existing persistent storage services that are provided by Google Cloud. If you’re deploying dojot using Kubernetes to a different cloud provider, some adjustments to fit the different deployments might be necessary.
Information about the currently supported persistent storage for Kubernetes can be found at persistent-volumes page.
To install the Kubernetes client on your machine before proceeding with this guide, follow the proper instructions as presented on the Kubernetes documentation.
Also, verify that your client is capable of connecting to the cluster.
For providing access for a local cluster, follow the documentation below:
If the Kubernetes cluster is running on a specific cloud platform like Google Cloud, follow the steps as presented by your cloud provider.
To deploy dojot to a Kubernetes environment, we provide a script for clusters with Ceph as storage solution.
To download the required files using git, run the following command:
git clone https://github.com/dojot/kubernetes.git
or, to download a compressed zip file containing the data, use the following link: https://github.com/dojot/kubernetes/archive/master.zip
This repository contains all the scripts and deployment files necessary to
properly setup dojot’s containers. There is one file that must be changed:
config.yaml, which contains all the parameters used by these scripts. An
example of such file is this:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
--- version: 0.2.0-nightly20180319 namespace: dojot storage: type: ceph cephMonitors: - '10.0.0.1:6789' - '10.0.0.2:6789' - '10.0.0.3:6789' cephAdminId: admin cephAdminKey: AQD85Z5a/wnlJBAARNISUDpC6RHc8g/UkUcDLA== cephUserId: admin cephUserKey: AQD85Z5a/wnlJBAARNISUDpC6RHc8g/UkUcDLA== cephPoolName: kube externalAccess: type: publicIP ips: - '10.0.0.1' - '10.0.0.2' - '10.0.0.3' ports: httpPort: 80 httpsPort: 443 mqttPort: 1883 mqttSecurePort: 8883 services: zookeeper: clusterSize: 3 postgres: clusterSize: 3 mongodb: replicas: 2 kafka: clusterSize: 3 auth: emailHost: 'smtp.gmail.com' emailUser: 'email@example.com' emailPassword: 'password'
From line 5 to 14, we have Ceph configuration parameters. The
attribute specifies how many monitors are going to be used and by which address
they can be accessed. For more information about this element, check ceph
attributes refers to user information. These values are set/generated in user
externalAccess section we have what addresses and ports should be
exposed for external access. In
services section, we can configure how many
replicas we want to each service and a few other parameters to configure that
service (for instance, auth taks an
To configure and start the kubernetes cluster, just install all python requirements and start the deploy.py script:
pip install -r ./requirements.txt python ./deploy.py